燃煤电厂软土层地基预处理方案和施工探究

本文阐述了预处理的重要性,揭示了当前施工中存在的问题,并对软土层地基处理提出了具体的方案。     

Simulation study on the influence of magnetic field in the near-anode region on anode power deposition of ATON-type Hall thruster

The highest deposition of power and temperature is always near the cusp of the ATON-type Hall thruster. This shows that when there are electrons gathering at the cusp, the distribution of heat load will be uniform, which will potentially damage the reliability. Therefore, we optimize the magnetic field near the anode. We changed the magnetic field characteristics in the near-anode region with an additional magnetic screen, and performed numerical simulation with particle-incell simulation. The simulation results show that the magnetic field of the thruster with the additional magnetic screen can alleviate the over-concentration of power deposition on the anode and reduce the power deposition in the anode by 20%, while ensuring that the overall magnetic field characteristics do not change significantly.     

动力蓄电池包挤压失效仿真与实验

为提高动力蓄电池包挤压仿真的精度，将延性损伤准则引入到有限元仿真，通过单轴拉伸试验、纯剪切试验与缺口件拉伸试验与有限元仿真，获得了某动力蓄电池包结构所用材料6061-T6铝合金的延性损伤参数。型材三点弯曲试验、动力蓄电池包挤压试验与有限元仿真的结果表明：输入延性损伤参数的有限元仿真结果与试验结果误差小，能较为准确地模拟铝合金损伤对结构承载性能的影响；不考虑材料失效的结果与试验结果误差较大。     

枞树型核电轮槽精铣刀制造技术优化设计

以枞树型叶根精铣刀为例,阐述了可换硬质合金型线刀体和刀片精铣刀的优化设计、制造工艺、建模及优化设计,进行切削过程加工策略优化和加工过程模拟,设计制造了锥柄专用工装及检测环规、磨削刀片后角专用工装,采用NUMROTO软件编制刀片加工工步。该项目研制的可换刀片精铣刀型线精度完全能达到进口铣刀水平,能满足大部分轮槽与叶根加工对型线精度的要求,可以大幅度节约刀具费用。     

基于修正幂律模型流体的柳叶形扶正器旋流规律及应用

为提高注水泥过程中水泥浆顶替效率，国内外愈来愈多地使用旋流扶正器。但是，目前旋流扶正器结构参数主要靠经验设计，缺乏理论基础也没有相关行业标准。针对依据文丘里效应设计的柳叶形旋流扶正器，基于修正幂律流体模型，构建了旋流扶正器旋流长度计算模型。通过数值模拟对旋流扶正器井下旋流规律进行研究，推导出了旋流扶正器在修正幂律流体条件下，周向平均速度和完全顶替的临界速度公式。基于旋流扶正器井下旋流规律，分析了井眼环空结构、流体性能、井下井壁附着力对水泥浆顶替效率的影响，优化了柳叶形旋流扶正器旋流角、扶正棱长度、扶正棱有效体积和扶正器高度等设计参数。对比分析了柳叶形与常规旋流扶正器在不同工况下的旋流长度，柳叶形扶正器的旋流长度比常规扇形平均提升了32%，比常规梯形扶正器平均提升了47%。柳叶形扶正器在新疆顺北油田顺北3井等20多井次超深井应用，应用井固井质量明显优于常规扇形的旋流扶正器。     

An intelligent EGWO-SCA-CS algorithm for PSS parameter tuning under system uncertainties

This paper proposes a novel hybrid technique called enhanced grey wolf optimization-sine cosine algorithm-cuckoo search (EGWO-SCA-CS) algorithm to improve the electrical power system stability. The proposed method comprises of a popular grey wolf optimization (GWO) in an enhanced and hybrid form. It embraces the well-balanced exploration and exploitation using the cuckoo search (CS) algorithm and enhanced search capability through the sine cosine algorithm (SCA) to elude the stuck to the local optima. The proposed technique is validated with the 23 benchmark functions and compared with state-of-the-art methods. The benchmark functions consist of unimodal, multimodal function from which the best suitability of the proposed technique can be identified. The robustness analysis also presented with the proposed method through boxplot, and a detailed statistical analysis is performed for a set of 30 individual runs. From the inferences gathered from the benchmark functions, the proposed technique is applied to the stability problem of a power system, which is heavily stressed with the nonlinear variation of the load and thereby operating conditions. The dynamics of power system components have been considered for the mathematical model of a multimachine system, and multiobjective function has been framed in tuning the optimal controller parameters. The effectiveness of the proposed algorithm has been assessed by considering two case studies, namely, (i) the optimal controller parameter tuning, and (ii) the coordination of oscillation damping devices in the power system stability enhancement. In the first case study, the power system stabilizer (PSS) is considered as a controller, and a self-clearing three-phase fault is considered as the system uncertainty. In contrast, static synchronous compensator (STATCOM) and PSS are considered as controllers to be coordinated, and perturbation in the system states as uncertainty in the second case study.     

非调制双色红外测温误差实时补偿方法研究

针对环境温度变化对双色红外测温准确度的影响,基于双色比色红外测温原理,分析了非调制双色红外测温的误差来源,提出一种新的快门式非调制双色红外测温方法。在光路中增加快门及其控制模块,控制快门闭合,将测得系统偏移作为补偿项,补偿实际测温时因温度变化给测量带来的误差。仿真结果表明,在600～1 100℃的测温范围内,长时间使用的无快门非调制红外双色测温的精度严重劣化,而快门式非调制双色红外测温的准确度大幅提高,可达到±0.5%。     

Design of Feedback Shift Register of Against Power Analysis Attack

Stream ciphers based on linear feedback shift register (LFSR) are suitable for constrained environments, such as satellite communications, radio frequency identification devices tag, sensor networks and Internet of Things, due to its simple hardware structures, high speed encryption and lower power consumption. LFSR, as a cryptographic primitive, has been used to generate a maximum period sequence. Because the switching of the status bits is regular, the power consumption of the LFSR is correlated in a linear way. As a result, the power consumption characteristics of stream cipher based on LFSR are vulnerable to leaking initialization vectors under the power attacks. In this paper, a new design of LFSR against power attacks is proposed. The power consumption characteristics of LFSR can be masked by using an additional LFSR and confused by adding a new filter Boolean function and a flip-flop. The design method has been implemented easily by circuits in this new design in comparison with the others.     

选区激光熔化工艺参数对气雾化316L不锈钢粉末成形制品性能的影响

本研究系统考察了激光功率和扫描速度对316L不锈钢粉末选区激光熔化工艺成形熔道、制品微观组织及力学性能的影响,并分析了各类缺陷的形成原因。研究结果表明:在低激光功率和高扫描速度条件下,熔道中出现了大量球状颗粒,这些颗粒之间的空隙恶化了下一层粉末的熔化条件,这正是成形制品中熔道分布混乱以及孔洞、裂纹产生的根本原因,进而导致成形制品力学性能降低;在高激光功率和低扫描速度条件下,熔池快速升温/冷却的热应力作用增强,使得成形制品的熔道交界处也存在孔洞和裂纹等缺陷。在本研究实验条件下,激光功率为350 W,扫描速度为1750 mm/s时,SLM成形制品的力学性能最为优异,其中抗拉强度为731 MPa、屈服强度为638 MPa、断后伸长率为40.0%,致密度为96.27%。